Need a policy because of a recent regulatory change? We’ve got it for you. Need some quick training on a specific HR topic? We’ve got it for you. HR Insider provides the resources you need to craft, implement and monitor policies with confidence. Our team of experts (which includes lawyers, analysts and HR professionals) keep track of complex legislation, pending changes, new interpretations and evolving case law to provide you with the policies and procedures to keep you ahead of problems. FIND OUT MORE...
Elevated Work Platforms: Scissor Lifts, Boom Lifts and Platform Hazards Stats and Facts

FACTS

  • Tip-Over Hazard: Scissor and boom lifts can roll over on uneven ground, slopes, or soft soil — small defects like potholes or drains can cause catastrophic rollover when the platform is extended.
  • Falls from the Platform: Workers fall when climbing guardrails for reach, when struck by another vehicle, or when the platform is jolted; standing on rails is a leading contributor.
  • Contact with Power Lines: Boom lifts near energized lines can electrocute operators and ground crew; OSHA requires a 10-foot minimum clearance from lines up to 50 kV.
  • Crushing and Caught-Between: Operators can be pinned between the top rail and overhead beams, joists, or piping when raising the platform without looking up.
  • Driving While Elevated: Repositioning a lift with the platform raised shifts the center of gravity and is a common cause of tip-over fatalities.
  • Wind Exposure: Operating a boom lift above manufacturer wind limits (often 28 mph / 45 km/h) destabilizes the unit and can cause loss of control.
  • Untrained Operators: Using a MEWP without task-specific training, model familiarization, and a pre-shift inspection sharply increases the risk of serious incident.

STATS

  • The U.S. Bureau of Labor Statistics reports an average of roughly 26 worker deaths per year involving aerial lifts, driven mainly by falls, tip-overs, and electrocutions.
  • OSHA's Top 10 Most Cited Standards listed Fall Protection (29 CFR 1926.501) as the #1 most violated standard every year from FY 2020 through FY 2024.
  • The IPAF Global Safety Report identified falls from the platform as the leading cause of fatal MEWP incidents in North America between 2020 and 2023.
  • CPWR data shows scissor lifts alone were involved in at least 21 U.S. construction worker deaths, with tip-overs and falls accounting for roughly two-thirds of those fatalities.
  • NIOSH FACE reviews indicate about one-third of aerial lift deaths involve tip-overs, most caused by uneven ground, overloading, or operating on excessive slopes.
  • AWCBC data shows falls from elevation — including aerial work platforms — remain among the top three causes of accepted lost-time claims in Canadian construction, with tens of thousands of claims annually from 2019–2023.